1925 Brandon Dr.
Suite 400
Tyler, Texas 75703

903-509-2727 phone
903-939-1559 fax
Procedure for Placing an Order.

1) All of the parts numbers are listed on the far left side of the parts table.
2) Make a list of all of the parts that you would like to order, Part # and Qty.
3) We accept Visa, Master Card and Discover
4) We will need your billing address for your credit card
5) Shipping address if different than the billing address
6) We will also need your phone number
7) Please verify that the prices on the web are current and good, by either phone, fax or email.
Please help us eliminate mistakes and have all of the above information before placing your order.

International Orders( Canadian orders are not considered International):
Due to the high level of fraud we no longer accept credit cards from over-seas customers. Your order will need to paid for via Pay-Pal of bank transfer, this is mandatory for all new customers. There is also a $200.00 minimum order for all international orders, with out exceptions.

*****PLEASE MAKE A NOTE OF SOME RECENT CHANGES TO ALL PAY-PAL ORDERS. PAY-PAL CHARGES US 4.8% FOR ALL ORDERS AND THUS WE CHARGE 2.5% TO THE CUSTOMER. YOU CAN BANK WIRE TRANSFER DIRECTLY TO OUR ACCOUNT FOR NO SERVICE CHARGE BUT ALL PAY-PAL FUNDS WILL BE CHARGED 2.5% UNLESS YOU SEND THE FUNDS USING YOUR PERSONAL PAYMENT OPTIONS********
H.R. 4040
CHP will continue to sell parts to the adult population for the mini vintage and mini motocross industry. It will be the responsibility of the purchasing adult as to the disposition of all products purchased from CHP will adhere to the guidelines of H.R. 4040 and will remain in the possession and control of the adult purchaser. All of the parts sold by CHP should be installed and maintained by a qualified mechanic. CHP accepts no responsibility for the installation, maintenance and or operation of these products. Motorcycles can cause physical injury and death, CHP accepts no liability for these occurrences.
Click on the Order Form button for a printable form.
Item # Description Price Thumb Nail Pictures
CH Performance new Horse Power T-Shirts. Tastefully designed and clean. Comes in either Black or White, Medium, Large, X-Large and XX-Large. Haynes 100% cotton shirts. $15.00
P630 CHP Racing T's. 3-D Mechanical Design with
large back logo and small
logo on upper right chest as well as sleeve

logo in mono-chrome. Haynes 100% cotton shirts.

Shirt comes in Youth Med, Youth Large, Adult Med, Large and XL
$15.00
Y83 CDI, Takegawa Performance unit for your Zuma 125cc equipped WITH OUT a Fuel Injection unit, for carburetor models only. Has a built in Rev Limiter function that can be set to 8800, 9200, 9600, 10,000, 10,400, 10,800 RPM as well as NO LIMIT. Ignition timing function has multiple settings 16, 18, 19, 21, 22, 24 and 27 degrees BTDC, which will allow you to set your timing for almost any motor mod that you have added to your motor. $256.50
Y77 Takegawa Controller for the your Fuel Injection unit. Programmable controller for making custom settings to your Fuel Injection unit to tune your injection system to match your performance up-grades. This unit allows you to extend the duration of the fuel injection shot thus allowing more fuel per stroke. It has 16 different settings, +2% all the way up to a 32% increase over stock. Not recommended for stock motors, highly recommended when installing the Takegawa S-Stage bore kit. $189.00
Y76 Camshaft, Takegawa performance cam for your Zuma equipped with a Fuel Injection unit. This unit is specially designed for better mid-range performance and power. Can be used with a stock head and motor or in conjunction with the Takegawa bore kit or other performance bore kit. Highly recommended that you use the Takegawa FI Controller to take full advantage of the improved cam design for maximum performance. Will not work with the Takegawa Roller Rocker Arms. $182.25
Y82 Roller Rocker kit and performance camshaft for the FI Zuma 125. Takegawa design of the new ROLLER ROCKER ARM design as well as the matching roller camshaft design. More lift with out the disadvantages of valve and rocker bounce and well as lower rotating friction and less parasitic losses associated with high lift camshafts. This kits installs in your stock head that is set up for FI. $378.00
Y85
Bore kit, 155.6cc Privateer Racing. High compression fully machined piston with Japanese piston ring set as well as a head and base gasket set up. Aluminum cylinder with precision machined steel sleeve and piston pin and cir-clips. If you are looking for a high grade well thought out bore kit for a bargain price, this will be one of the best bangs for the buck.
$229.95
Y75 Bore kit, 155.6cc Takegawa S-Stage. High compression piston and ring kit, Gasket set as well as Nicasil Cylinder. This is the same bore that is included in item Y74, less the performance camshaft. $297.00
Y74 Bore kit, 155.6cc Takegawa S-Stage with performance Camshaft. Kit comes complete with a High compression piston complete set of piston rings and wrist pin, Performance cam for improved mid range performance, gasket set as well as a Nicasil Cylinder.
All of theses items are specifically designed to run with your stock cylinder head and components.
$459.00
Y81 Takegawa Performance kit.
155.6cc Bore kit
Performance High lift Camshaft
High speed Variator and weights
CDI with mapping capability for the FI unit
Heavy Duty clutch spring.

Must be used on the FI motors only.
$756.00
Y84
Bore kit, 168cc Privateer Racing. High compression fully machined piston with Japanese piston ring set as well as a head and base gasket set up. Aluminum cylinder with precision machined steel sleeve and piston pin and cir-clips. If you are looking for a high grade well thought out bore kit for a bargain price, this will be one of the best bangs for the buck.
Installation of this kit will require boring on your motor cases.
$258.21
Y79 Heavy Duty Takegawa Clutch spring for the FI clutch assy. Designed to give 15% more adhesion than stock. $27.00
Y80 Takegawa Weight roller set, 8.5 Grams X 6 pcs, for the FI set up. $40.50
Y78 Variater Drive Face, Takegawa performance, for Zuma 125cc with FI motor. Improves Top speed of your bike when used in conjunction with the Takegawa weight set, ITEM Y80. If used with stock weights, Takegawa states that there will be no top end speed increases. $64.80

Call, Phone or Fax any questions that you have
Phone 903-509-2727
Fax 903-939-1559
Email Infochp@yahoo.com
CHP
1925 Brandon Dr.
Suite 400
Tyler, Texas 75703

Design by Lyle Mirsky