1925 Brandon Dr.,Suite 400 Tyler, Texas 75703,903-509-2727 phone,903-939-1559 fax
| Procedure for
Placing an Order. 1) All of the parts numbers are listed on the far left side of the parts table. 2) Make a list of all of the parts that you would like to order, Part # and Qty. 3) We accept Visa, Master Card and Discover 4) We will need your billing address for your credit card 5) Shipping address if different than the billing address 6) We will also need your phone number 7) Please verify that the prices on the web are current and good, by either phone, fax or email. Please help us eliminate mistakes and have all of the above information before placing your order. International Orders( Canadian orders are not considered International): Due to the high level of fraud we no longer accept credit cards from over-seas customers. Your order will need to paid for via Pay-Pal of bank transfer, this is mandatory for all new customers. There is also a $200.00 minimum order for all international orders, with out exceptions. |
| H.R. 4040 CHP will continue to sell parts to the adult population for the mini vintage and mini motocross industry. It will be the responsibility of the purchasing adult as to the disposition of all products purchased from CHP will adhere to the guidelines of H.R. 4040 and will remain in the possession and control of the adult purchaser. All of the parts sold by CHP should be installed and maintained by a qualified mechanic. CHP accepts no responsibility for the installation, maintenance and or operation of these products. Motorcycles can cause physical injury and death, CHP accepts no liability for these occurrences. |
 |
Click on the Order Form button for a printable form. | |
 |
||||
| Item # | Description | Price | Model | Thumb Nail Pictures |
| 6mm | 6mm Acorn nut | $0.40 | ALL |  |
| C20 | Element, Air filter, * | $9.00 | ALL |  |
| C21 | Rubber Boot, Air Box to Carb | $12.50 | ALL |  |
| Z22E | Clamp. Air filter clamp to secure the rubber air box boot to the carb assy. | $6.00 | ALL | |
| C22 | End Cap, Chrome, for airbox | $7.00/each | KO-78 |  |
| C23 | Seal for
airbox end caps. These seals were originally glued to the inside of both chrome
end caps, item C22. Click the exploded view that we have provided to see the
exact location of these seals. If you buy a new air box , the newer version of the air box will have some seals glued on both and of the box and will not need these seals for the end caps. If you are using your old stock original air box, a good seal is essential and these seal are needed in good order. A new air box is shown below with the newer seals in place. |
$6.79/each | KO-82 |  |
| C24 | Air box | $39.00 | KO-82 |  |
| C25A | Bolt, for air cleaner assy. Secures both end caps on air box as well as holding filter element in place. | $3.25 | KO-82 | |
| C25B | Holder, Element. Cradles the air filter element in place inside of air box. This item is required for original air boxes with with internal wire screen baffle plate welded in. This baffle plate was only on the original air boxes and does not exist on the replacement Honda air boxes. | $4.50 | KO-82 | |
| C25C | Spacer, Air box. Threads through the air filter element and spaces and secures both chrome end caps in place to insure proper alignment of the air cleaner assy. | $7.75 | KO-82 | |
| C25K | Air cleaner assy, complete | $78.00 | ALL |  |
| C103 | Rubber Bumper, under seat. This bumper ensures that your seat pan sits at the proper height and does not allow the seat pan to rub directly on the top of your frame. Isolates the the seat from the vibrations of the frame and motor. | $3.99 | ALL |  |
| C104 | Spring, tool pouch retainer | $2.99 | ALL |  |
| C100 | Foam, Seat. Redesigned for an adult rider for a more comfortable feel and longer life. Will not deteriorate with moisture like the original foam. Molded in the exact correct shape for the KO model. | $42.00 | KO |  |
| C101-1 | Seat Cover with Ironed Seams, just like the original. DO NOT BE FOOLED, THIS IS THE ONLY CORRECT COVER OUT THERE, WITH GAP IN THE PLEATS AT THE FRONT AND REAR OF THE TOP SECTION !!!This cover is as close to the original as you can get, absolutely beautiful.. We have now added a vapor barrier to the seat cover to prevent moisture from leaking through the cover and saturating your foam and thus causing the foam to deteriorate. You will not be disappointed. If you are doing a full restoration, this is the cover you need. Purchase the seat stencil #67 and add the logo for your self and save a little money. * | $59.95 | KO |  |
| C101 | Seat Cover with Ironed Seams, just like the original. DO NOT BE FOOLED, THIS IS THE ONLY CORRECT COVER OUT THERE, WITH GAP IN THE PLEATS AT THE FRONT AND REAR OF THE TOP SECTION !!!This cover is as close to the original as you can get, absolutely beautiful.. Comes silk-screened with the Honda Logo. We have now added a vapor barrier to the seat cover to prevent moisture from leaking through the cover and saturating your foam and thus causing the foam to deteriorate. You will not be disappointed. If you are doing a full restoration, this is the cover you need * | $69.95 | KO |   |
| C101-2 | Seat cover kit I. Contains C101, 67 and 22K. If you have a good pan and good foam and you are comfortable recovering your seat, this is the most cost effective kit for you. | $72.50 | KO |  |
| C101-3 | Seat cover kit II. This kit adds the seat foam to kit C101-2, all you need is a good solid seat pan and you are in business. | $111.00 | KO |  |
| 22K | Seat stud set, around bottom for seat cover to reproduce the same look at the original CT70 KO and CT70 H KO look on your seat. These are now the exact same seat studs that we use on our NEW CT70 KO seat.* | $10.00 | KO |  |
| 67 | Stencil, "Honda" for back of seat . Apply this stencil on your cover after it has been installed on the seat, check for proper alignment and then we recommend that you use SILVER Spray Vinyl Dye. Two very light coats of spray dye really give that original Honda look to the covers.* | $5.00 | ALL |  |
| C129 | Complete Seat, exact reproduction. The only seat
cover and seat on the market that has all of the correct features, pleating
design, pleat spacing, stenciling of the HONDA name, correct seat pan as well
as HEAVY duty cover, manufactured from the heaviest gauge vinyl available for
long life and durability. * |
$239.00 | KO |     |
| C170A |  |
|||
| C170B |  |
|||
| C170C |  |
|||
| C170 | Hinge Assy, for the seat. Hinge includes both sides of the hinge assy as well as the bolt/pin. | $20.12 | ALL |  |
| C102 | $45.00 | K1 |  |
|
| C149 | $45.00 | K2-1976 | ||
| C150 | $45.00 | 1977-1978 | ||
1925 Brandon Dr.
Suite 400
Tyler, Texas
75703
903-509-2727 phone
903-939-1559 fax
Email Infochp@yahoo.com
Design by Lyle Mirsky