14040 Hwy 110 S. Whitehouse Texas 75791
903-509-2727 phone
903-939-1559 fax
| Procedure for
Placing an Order. 1) All of the parts numbers are listed on the far left side of the parts table. 2) Make a list of all of the parts that you would like to order, Part # and Qty. 3) We accept Visa, Master Card and Discover , Pay-pal (to confirmed address only) 4) We will need your billing address for your credit card 5) Shipping address if different than the billing address 6) We will also need your phone number 7) Please verify that the prices on the web are current and good, by either phone, fax or email. Please help us eliminate mistakes and have all of the above information before placing your order. International Orders( Canadian orders are not considered International): Due to the high level of fraud we no longer accept credit cards from over-seas customers. Your order will need to paid for via Pay-Pal (to confirmed address only)of bank transfer, this is mandatory for all new customers. There is also a $200.00 minimum order for all international orders, with out exceptions. CHP is not responsible for any duties and taxes that might be charged by the customers country, 100% of these charges are the responsibility of the customer, by placing an order the customers agrees to all of these terms. |
| H.R. 4040 CHP will continue to sell parts to the adult population for the mini vintage and mini motocross industry. It will be the responsibility of the purchasing adult as to the disposition of all products purchased from CHP will adhere to the guidelines of H.R. 4040 and will remain in the possession and control of the adult purchaser. All of the parts sold by CHP should be installed and maintained by a qualified mechanic. CHP accepts no responsibility for the installation, maintenance and or operation of these products. Motorcycles can cause physical injury and death, CHP accepts no liability for these occurrences. |
| Due to the current strength of the yen, there have been numerous price changes, PLEASE CONTACT US FOR CURRENT PRICES. As soon as the Yen price falls against the dollar, we will also lower prices. |
 |
Click on the Order Form button for a printable form. | |
| Item # | Description | Price | Thumb Nail Pictures |
| CH Performance new Horse Power T-Shirts. Tastefully designed and clean. Comes in either Black or White, Medium, Large, X-Large and XX-Large. Haynes 100% cotton shirts. | $15.00 |  |
|
| P630 | CHP Racing T's. 3-D Mechanical Design
with large back logo and small logo on upper right chest as well as sleeve logo in mono-chrome. Haynes 100% cotton shirts. Shirt comes in Youth Med, Youth Large, Adult Med, Large and XL |
$15.00 |  |
| T30 | Universal Bike stand. Perfect size for the Mini Motorcross bikes. Gripper rubber molded top for no slip and abrasion resistance as well as long life. Removable tray, heavy duty construction and black power coat, make this one of the most useful stands for our industry on the market. | $98.00 |  |
| Kitaco NSF-100 Rear body package with gripper seat pad. Precision molded fiberglass rear body package finished off in gel-coat white, ready for paint or run like it is. This kit also contains a thin gripper seat rubber pad that can be glued in place. | $195.00 |  |
|
| P374BK | CHP BLACK Billet aluminum Magnetic Drain Plug and sealing washer. Our billet drain plug has been machined with pre-drilled holes for your safety wire anchor as well as the strongest magnet on the market. Collects and debris that might be suspended in our oil system, thus eliminating the possibility of motor damage to vital moving parts. Magnetic strength, strong enough to easily suspend a shift drum. | $9.95 |  |
| P374B | CHP BLUE Billet aluminum Magnetic Drain Plug and sealing washer. Our billet drain plug has been machined with pre-drilled holes for your safety wire anchor as well as the strongest magnet on the market. Collects and debris that might be suspended in our oil system, thus eliminating the possibility of motor damage to vital moving parts. Magnetic strength, strong enough to easily suspend a shift drum. | ||
| P374R | CHP RED Billet aluminum Magnetic Drain Plug and sealing washer. Our billet drain plug has been machined with pre-drilled holes for your safety wire anchor as well as the strongest magnet on the market. Collects and debris that might be suspended in our oil system, thus eliminating the possibility of motor damage to vital moving parts. Magnetic strength, strong enough to easily suspend a shift drum. | ||
| P499 | 24mm Intake, Kitaco | $42.00 |  |
| P508 | 24mm Carb Kit, Kitaco | $160.00 |  |
| P232 | Kitaco Carbon Fiber Reeds | $45.00 |  |
| P136 | Gasket set, Big Bore | $14.85 |  |
| P572 | 43mm Piston Kit,. Kit includes piston and ring, wrist pin and cir-clips as well as your top end gasket set. Kitaco | $78.00 |  |
| P573 | 43.5mm Piston Kit. Kit includes piston and ring, wrist pin and cir-clips as well as your top end gasket set. Kitaco | $78.00 | |
| P857 | 44.5 mm Piston kit, This top end piston kit includes the piston and ring as well as the wrist pin, cir-clips and tope end gasket set. Kitaco | $78.00 | |
| P536 | Kitaco 63cc Bore Kit. Complete with piston, rings cylinder and gasket set. Boost your stock 50cc NSR-50 to 63cc and stay legal for your 65cc class racing. | $289.99 |  |
| P536-0 | 63cc Replacment piston kit, Kitaco | $85.00 | |
| P513 | Pre-Loader for front forks | $89.50 |  |
| P479 | Disc, Front rotor, floating 220mm | $165.00 |  |
| P129 | Disc, Rear rotor, NSR-50 | $102.50 | |
| P107F | Wheel, Front, Aluminum, 12" | $419.48 |
 Front wheel is shown with disc. Disc is not included in the price of the front rim. |
| P107R | Wheel, Rear, Aluminum, 12" | $468.00 |
Call, Phone or Fax any questions that you have
Phone 903-509-2727
Fax 903-993-1559
Email Infochp@yahoo.com
maintained by and the property ofCHP Motorsports Inc.