1925 Brandon Dr.,Suite 400 Tyler, Texas 75703,903-509-2727 phone,903-939-1559 fax
| Procedure for
Placing an Order. 1) All of the parts numbers are listed on the far left side of the parts table. 2) Make a list of all of the parts that you would like to order, Part # and Qty. 3) We accept Visa, Master Card and Discover 4) We will need your billing address for your credit card 5) Shipping address if different than the billing address 6) We will also need your phone number 7) Please verify that the prices on the web are current and good, by either phone, fax or email. Please help us eliminate mistakes and have all of the above information before placing your order. International Orders( Canadian orders are not considered International): Due to the high level of fraud we no longer accept credit cards from over-seas customers. Your order will need to paid for via Pay-Pal of bank transfer, this is mandatory for all new customers. There is also a $200.00 minimum order for all international orders, with out exceptions. |
| H.R. 4040 CHP will continue to sell parts to the adult population for the mini vintage and mini motocross industry. It will be the responsibility of the purchasing adult as to the disposition of all products purchased from CHP will adhere to the guidelines of H.R. 4040 and will remain in the possession and control of the adult purchaser. All of the parts sold by CHP should be installed and maintained by a qualified mechanic. CHP accepts no responsibility for the installation, maintenance and or operation of these products. Motorcycles can cause physical injury and death, CHP accepts no liability for these occurrences. |
 |
Click on the Order Form button for a printable form. | |
 |
||||
| Item # | Description | Price | Model | Thumb Nail Pictures |
| 143 | Clip for fuel line | $1.00 | All |  |
| C50 | Gas Cap for PLASTIC tanks only. | $12.95 | KO. Plastic Tanks Only |
 |
| Z45 | Gas cap for Steel tank | $20.00 | K1-All For All Steel Tanks |
 |
| C51 | Battery Cover | $13.38 | All |  |
| C68 | Fuel Tank, Honda Steel. Factory sealed replacement tank for your CT70. Regular fuel tap as well as Reserve tap. Tank requires Steel fuel cap. You can use this as a replacment for the plastic tank. There will be some new items that you will need to install and put in to operation, if you bike had a plastic tank originally. Fuel cap, filler neck grommet as well as top tank mount for the steel tank. | $86.47 |  |
|
| C68-1 | Isolator, Front tank, Honda. Molded rubber front tank mount or isolator. Installs on the front end of the fuel tank to insure the proper installation of the fuel tank inside of the frame. Locks tank in place as well as reduces vibration transmission to the tank. | $4.99 |  |
|
| C68-2 | ||||
| C155 | Grommet, Filler Neck. For all STEEL tank CT70. | $6.75 | K1-78 |  |
| C155P |  Grommet, Filler neck for all PLASTIC Fuel tank CT70'S. The plastic tanks were usually manufactured in the first year of production or the KO models. |
$6.96 | KO All Plastic Tanks |
 |
| C178 | Tank Bracket, Top | $15.00 | K1-78 |  |
| C185 | Fuel Line Gray, Priced by the foot | $2.95/ft |  |
|
1925 Brandon Dr.
Suite 400
Tyler, Texas
75703
903-509-2727 phone
903-939-1559 fax
Email Infochp@yahoo.com
Design by Lyle Mirsky