Procedure for Placing an Order.

1) All of the parts numbers are listed on the far left side of the parts table.
2) Make a list of all of the parts that you would like to order, Part # and Qty.
3) We accept Visa, Master Card and Discover , Pay-pal (to confirmed address only)
4) We will need your billing address for your credit card
5) Shipping address if different than the billing address
6) We will also need your phone number
7) Please verify that the prices on the web are current and good, by either phone, fax or email.
Please help us eliminate mistakes and have all of the above information before placing your order.

International Orders( Canadian orders are not considered International):
Due to the high level of fraud we no longer accept credit cards from over-seas customers. Your order will need to paid for via Pay-Pal (to confirmed address only)of bank transfer, this is mandatory for all new customers. There is also a $200.00 minimum order for all international orders, with out exceptions. CHP is not responsible for any duties and taxes that might be charged by the customers country, 100% of these charges are the responsibility of the customer, by placing an order the customers agrees to all of these terms.
H.R. 4040
CHP will continue to sell parts to the adult population for the mini vintage and mini motorcross industry. It will be the responsibility of the purchasing adult as to the disposition of all products purchased from CHP will adhere to the guidelines of H.R. 4040 and will remain in the possession and control of the adult purchaser. All of the parts sold by CHP should be installed and maintained by a qualified mechanic. CHP accepts no responsibility for the installation, maintenance and or operation of these products. Motorcycles can cause physical injury and death, CHP accepts no liability for these occurrences.
Click on the Order Form button for a printable form.

Item # Description Price Model Thumb Nail Pictures
CH Performance new Horse Power T-Shirts. Tastefully designed and clean. Comes in either Black or White, Medium, Large, X-Large and XX-Large. Haynes 100% cotton shirts.
P630B-S, Small black T-Shirt
P630B-M, Medium black T-Shirt
P630B-L, Large black T-Shirt
P630B-XL, X-Large black T-Shirt
P730W-S, Small white T-Shirt
P730W-M, Medium whiteT-Shirt
P730W-L, Large white T-Shirt
P730W-XL, X-Large white T-Shirt
$15.00  
P630 CHP Racing T's. 3-D Mechanical Design with
large back logo and small
logo on upper right chest as well as sleeve

logo in mono-chrome. Haynes 100% cotton shirts.
Shirt comes in Youth Med, Youth Large, Adult Med, Large and XL
$15.00  
T26 CHP Motor Caddy. 1 inch heavy duty construction and unique construction to allow access to virtually all parts of the motor. With your motor case assembled and then mounting to the CHP motor caddy, any maintenance issue or complete motor build up becomes an easy exorcise. Motor base manufactured to allow both CRF base motors as well as KLX motor cases. Finish off with a black mat powder coat $81.88  
T30 Universal Bike stand. Perfect size for the Mini Motorcross bikes. Gripper rubber molded top for no slip and abrasion resistance as well as long life. Removable tray, heavy duty construction and black power coat, make this one of the most useful stands for our industry on the market.
$98.00  
T13 CHP Heavy Duty Valve Spring Compressor set. Complete set includes 3 size of retainer cups, 25mm, 23mm and 19mm. This tool set comes with two length of cup holding stem, long 90mm and the short version already installed in the clamp, 50mm. These threaded cup holders come with spring loaded ball bearing locking feature to securely fix each size retainer cup while in use.
Manufactured from high temper steel, heat treated and carburized as well as neatly designed high impact molded plastic carrying case.
$49.99  
P374BK CHP BLACK Billet aluminum Magnetic Drain Plug and sealing washer. Our billet drain plug has been machined with pre-drilled holes for your safety wire anchor as well as the strongest magnet on the market. Collects and debris that might be suspended in our oil system, thus eliminating the possibility of motor damage to vital moving parts. Magnetic strength, strong enough to easily suspend a shift drum. $9.95
P374B CHP BLUE Billet aluminum Magnetic Drain Plug and sealing washer. Our billet drain plug has been machined with pre-drilled holes for your safety wire anchor as well as the strongest magnet on the market. Collects and debris that might be suspended in our oil system, thus eliminating the possibility of motor damage to vital moving parts. Magnetic strength, strong enough to easily suspend a shift drum.
P374R CHP RED Billet aluminum Magnetic Drain Plug and sealing washer. Our billet drain plug has been machined with pre-drilled holes for your safety wire anchor as well as the strongest magnet on the market. Collects and debris that might be suspended in our oil system, thus eliminating the possibility of motor damage to vital moving parts. Magnetic strength, strong enough to easily suspend a shift drum.
P849 CHP Super Coil. Delivering more than 69,000 Volts, surpassing the capacity of the old super coil by more than 25%. Higher compression motors require hotter spark to run properly. High compression ratios causes spark quince and thus suppresses the spark from your plug, with our new ULTIMA coil, your guaranteed to eliminate spark quince and deliver a constant high voltage spark to your plug and maintain top level performance from your motor.
Higher intensity spark with faster recovery and response. Longer plug life as well as a hotter spark. IMPROVES THE LOW END PERFORMANCE AS WELL AS ELIMINATES MANY IGNITION PROBLEMS.
$49.95
P191 Takegawa POWER CDI REV BOOSTER. This unit is the BEST CDI controller that we have ever run across. This will take out that low end bog on your bike as well as eliminating the rev limiter in your stock Honda CDI. $63.85
P522 Pig-Tail for your CDI Kitaco Rev box. Plugs into your stock Chinese wiring harness and allows for the Kitaco rev box to be installed in your system. $24.15
P200C Air Filter, Classic Honda USA foam filter for 26mm carb kit. $22.00
P93 Gold drive chain. This chain will last 10 times longer than your stock chain and is a must once you bump your horse power. There is no way around this item you will need this with any performance motor or bike. $44.00  
P408 Classic Honda Footpegs, set , PLAIN, billet aluminum with our unique new gripper diamond design. $75.00  
P409 Classic Honda Footpegs, set , RED, billet aluminum with our unique new gripper diamond design. $75.00
P139 Throttle assy, with grips and cable. Fits 20 - 22mm Keihin carbs. $30.45  
P258-K Kitaco 24mm Intake, New High RPM design. $70.00  
P481 Replacement rubber mount for your 24mm carb kit, for Kitaco aluminum intakes not Takegawa intake. $25.00  
P425-K Kitaco 24mm round slide carb kit for your XR/CRF50.Complete new design with short intake for high RPM's. Includes your tank spacers and throttle assy. $208.50  
P105 Kitaco 24mm flat slide carb kit for your XR/CRF-50. Complete new design with short intake for high RPM's. Includes your tank spacers and throttle assy. $250.00  
P260-K Kitaco 26mm intake, New High RPM design. $76.15  
P482 Replacement rubber mount for the 26mm carb kit. $35.95  
P159-K
Kitaco 26mm carb kit for your XR/CRF-50. Complete new design, with short intake for high RPMs. Includes tank spacers and throttle assy.
$231.51
P117-84 Cam Chain, , Reinforced for high rpm range. Ensures that you will not have any stretch and loss of power due to timing variations. $38.99 Xtreme CR 107/Thumpstar
P101-6 Takegawa Ultra Oil Pump Kit. 300% Increase in oil volume. This is a must for any Big Bore Kit installation.
Comes with the proper drill bit to enlarge the oil engine orifice.
$54.00

P844 Privateer Racing Oil Cooler Kit. Extra Thick unit measuring 1.250" thick and more than 4.375" long make this one of the largest capacity coolers on the market for this design envelope. Super strong mounting as well as lines, quick release spring clips, steel taps and sealing brass washers and high efficiency cooling oil tap for all stock Honda Based heads as well as Kitaco heads. $99.95
P856 Privateer HEAVY DUTY Racing Oil Cooler Kit. Aluminum Cooler dimension 1.375" thick and 6.750" long. Heavy Duty construction including a rock guard as well as rigid mount bracket that attaches to the intake bolts making for a very clean installation. Billet aluminum anodized red banjo fittings, right side head cover oil tap, gasket, oil lines and clamps. Kit comes with everything that you need for installation, compact and clean at a very low cost. $134.95  
P70C Classic Honda USA, CH Performance billet top head cover. Machined from billet 6061 aluminum on our CNC Mills. Finishes off that totally tricked out motor look. $37.00 Honda style motors
P237-CR Classic Honda USA, (RED)Tappet Vent Tap kit. This kit is a must for your high performance high revving motors. Relieves pressure from high RPM's and saves all of your motor oil seals. $25.00    
P237-CB Classic Honda USA, (BLUE)Tappet Vent Tap kit. This kit is a must for your high performance high revving motors. Relieves pressure from high RPM's and saves all of your motor oil seals. $25.00  
P860 Clutch kit, Takegawa, 5 disc kit for the Lifan 120cc, 140cc and 150cc as well as your YX 150cc and 160cc Motor. Replaces the weak link in your bottom end of your Chinese motor with quality pieces that will out last the rest of your bike. No more DNF finishes on your card because of broken clutches. Will handle any amount of HP that you can throw at this unit. $416.98 Lifan 120cc, 140cc, 150cc
YX
150cc &160cc
P861 Clutch kit, Takegawa, 5 disc kit for the YX 150cc and 160cc Motor. Comes complete with all of the internal of kit P860 as well as Magnesium cover and all of the hardware needed for your installation. Replaces the weak link in your bottom end of your Chinese motor with quality pieces that will out last the rest of your bike. No more DNF finishes on your card because of broken clutches. Will handle any amount of HP that you can throw at this unit.
Die Cast lightweight magnesium alloy clutch cover painted brown with application for of thermostat, oil cooler taps, cartridge-type paper filter and oil check level window.
$890.32 YX 150cc and 160cc
P475 CH Performance cam for the Xtreme motors. Nice mid range and vast improvement over your stock 107CR cam. $100.00 CR107
P173 ULTIMA RACING PIPE

The best performing pipe on the market, bar none.

No more mass produced pipes by large name companies, concerned with only the bottom line, that sell a simple bent piece of chrome tube designed for a 50cc motor.
These hand-built pipes are designed by PERFORMANCE people for PERFORMANCE people, one pipe at a time. Now with our new
ULTRA SLIM STAINLESS STEEL SUPER FLOW MUFFLER.
$259.00 Xtreme, Thumpstar direct bolt on. SDG needs additional mounting bracket.
P455 Shinko Front Tire 2.50 x 10. Perfect match for the rear tire listed below. You can not beat this prices or performance for the dirt. Formerly Yokahoma Tires. 10" TIRE. Front tire shown on the left.   $26.95
P456 Shinko Rear Tire 2.75 x 10. This is the widest tire on the market and also the most aggresive. You can not beat this prices or performance for the dirt. Formerly Yokahoma Tires. 10" TIRE. Rear tire shown on right.   $29.95


14040 Hwy 110 South
Whitehouse, Texas 75791

903-509-2727 phone

903-939-1559 fax

Email Infochp@yahoo.com

maintained by and the property ofCHP Motorsports Inc.